Protobuilders' Garage Proudly presents,
The Abarth 695SS Competizione addition to Abarth 695SS Assetto Corsa By Speedster63
This mod includes also the Speedster63's original mod, so no extra downloads is needed.
Bought by:
- Speedster63 Original 695SS Assetto Corsa
- CityTea for the Original Assetto Corsa sounds
- Nappe1 for the Competizione variation (Bodystyle, skins and physics).
- Papag21 of Brickyard Legends Team for the wide 10" light alloy rims in Competizione version.
Installation:
- Extract package to your GTL folder.
Notes:
This addition brings new bodystyle to the Speedster63's mod. Skins that came with the original mod were updated with new genstring and will work as they did in old version. User made skins need adding two "1" to the end of the genstring to make them compatible with this extension.
Same template, which I included in the package as well, can be used for making Competizione skins as Assetto Corsa skins.
695SS Competizione was the final works version of 695SS. Differences to Assetto Corsa are huge wheel arches and use of wide lowprofile slicks, lowering the car quite bit.
Performance has been calibrated to match Giannini 650NP Modena.
Have fun
Nappe1 signs off,
21st of February, 2020
--------------------------------------------------
----
Protobuilders' Garage Proudly presents,
The Giannini 500TV & Giannini 650NP mod for GT Legends
Based on the Abarth 695SS Assetto Corsa By Speedster63
Installation:
- Extract package to your GTL folder.
Brought to you by:
*The Protobuilders Garage and Friends*
- Basic Fiat 500 model from Speedste63's Abarth 695SS Assetto Corsa.
- Sounds: Citytea originally made for the Abarth 695SS
- 3D, texture and template modifications and new skins: Nappe1
- low profile 10" rims for 650NP: Papag21 of Brickyard Legends Team
- New suspension (which unfortunately could not made to the first version): Gravin
- Physics: Nappe1
- Skin ideas & support: Suti, Kanadanmajava.
- Physics, car structures and putting everything together: Nappe1
Acknowledgements / Thanks:
- My lovely wife for her patience and support
- Speedster63 for original 695SS
- Simbin AB: for the great game
- Everyone at Protobuilders Garage and Brickyard Legends.
Notes:
car is based on Speedster63's very nice 695SS model and I tried to reach him via email about permission, but without success. However in readme he grants rights to use his work as base for additional modding as long as he is creditted so I started the work on that basis. the 850cc cars were small hit in previous online championship, I decided to work with even smaller engine cars. As the Shotaro's Suzuki Fronte Coupe originally belongs to under 500cc class, it needed some down tuned physics variation and of course, real world competition, so I decided to make the smallest racing variation that Fiat 500 had: Giannini 500TV Montecarlo. While doing it, I got idea of updating Speedster63's Abarth by adding 1970-1971 695SS Competizione body style.
Car as short: Fiat 500F (F means front latched doors) with high tune 499cc air cooled two inline outputting around 30 horse power. Car weights around 460 kgs. Giannini was the Abarth's competition in mid 60's and early 70's and while it is mixed up with Abarth sometimes, it really was own make with several Fiat 500 based cars homologated to Group 2 (meaning that at least 1000 identical cars were built)
Abarth is sometimes called as Ferrari of small fiats. I think it is propriate to call Giannini as Lamborghini of small fiats. Their cars are not as refined as Abarth's and their consentration is more on the raw performance. Plus they did all this with almost one of the tenth of the resources that Abarth had.
I am hoping to add also 590GT Vallelunga as well as the 700R later on.
The Story:
In 1885 Giannini opened as garage, but in 1922 it became part of the Itala's service network and they started to tune and race Itala machinery. The biggest achievement from this period was the class victory in 1927 Mille Miglia. 1930's Giannini expanded their work to smaller cars like Fiat 500 Topolino. In addition to engine modifications, the brake arrangements were also changed. In 1938 Giannini broke a number of world records with a single seat racer powered by one of these 499 cc engines, equipped with a Siata head.
After the world war II and short venture in heavy machinery, Giannini brothers started really consentrate on competition, in which they had good track recond already from the 20's and 30's. Still based on pre-war Topolino basics, G1 and G2 engines were built, from which Twincam G2 powered "Giaur" took another class victory from 1950 Mille Miglia. During the 1950's the company rapidly expanded it sales by opening several Fiat sale outlets and garages. Though the sales were strong the company ended up in bad financial situation in 1961 and was closed. The Two Brothers disagreed about the direction taken and decided to go seperate ways. Two companies were born from which the Giannini Automobili S.p.A. is the one we are more interested.
In 1961-1963 Domeco Giannini had seen Abarth to sell tuning kit for the "new" Fiat 500 and saw it potential. In 1963 Giannini 500TV was launched as first as kit form and later on as readily built car. Kit itself was quite simple and not that expensive, but it boosted the normal 500 18hp to 27hp. (This might not sound much, but it is was done without boring the cylinders, so just some camshaft, head and carburation work. In nowadays terms, it would be same as there would be kit for Toyota Aygo / Peugeot 107 / Citroen C1 boosting it 72hp to 108hp!)
As these cars were made to race, Gianninis were soon seen eating standard Fiat 500 Sports alive in Italian Championship class under 500cc. In 1966, For the maximum performance you could have "Montecarlo" package, which added even bigger valves, nitrated camshaft, bigger carbs and new exhaust system. This boosted the horsepower up to 35hp. As this version had quite extensive modifications, Giannini 500TV got homologated to group 2, making it at last completely it's own car. And of course as the Abarth had dropped the original 500 Abarth kit and moved on to under 600cc and under 700cc classes (with 595 and 695 models), The 500cc class became Giannini's monopoly.
As the 500TV sold very well, Giannini decided to challenge Abarth also in 600cc class with Giannini 590GT and soon after that also in 700cc class with 650NP. Unlike Abarth, Giannini made their bigger engines with smaller bore and shorter stroke, making them rev higher and as a result the amount of power was also bigger. Both of them get eventually homologated and also factory works kits: for 590GT it was called "Vallelunga" and for 650NP "Modena". While 500TV kept the 500cc class crown for itself easily, 590GT and 650NP were extensively developed due neck to neck competition against Abarth. The last batch of under 700cc Gianninis had newer block from Fiat 126 with fuel injection, big disc brakes and much stronger gearbox. This all was possible thanks to homologating 650NP in 1969 to Group 2 and the very liberal group 2 rules in early 70's. These last cars were labelled as Giannini 700R.
The Different variations in this mod:
Giannini 500TV Montecarlo:
The works car as on it's peak just before the 500cc class was dropped.
Real world skins:
- #4 driven by Antonio Ghini in 1968.
- #30 is Italian Class Champion in 1966. Driven by: Maurizio Zanetti
- #222 driven by Luca Cordero di Montezemolo in Vallelunga 1968
- #34 real world skin, but unknown driver & event.
- a lots of individual gear ratios to fiddle to get every single bit of torque out of that tiny engine.
Giannini 650NP Modena:
The works car in early 70's. Before the Fiat 126 mechanics were put in place.
Real world skins:
- #24 Historic racing skin with unknown driver.
- #174, #214 Fictional skins.
- lots of stuff to tune in setup to keep the small car flying thru corners.
Skinning & Modding:
- Template included for both cars.
- Genstring options:
Pos 1= Driver ( 01 - 10 )
Pos 2= Driver ( 01 - 10 )
Pos 3= Front Bumper ( 1= Bumper front 2= Bumper front & Plate 3= NO Bumper front )
Pos 4= Rear Bumper ( 1= Bumper rear 2= Bumper rear & Plate 3= NO Bumper rear )
Pos 5= SoftTop ( 1= SoftTop plastic 2= SoftTop paint )
Pos 6= Exhaust ( 1= one Pipe 2= two Pipe )
Pos 7= WHEELS ( 1= Black hubcab wheels for 500TV and 4 blade black light alloy wheels 650NP. Hopefully more options in future.)
Pos 8= Rollcage ( 1= YES 2= NO )
Pos 9= Race Upgrade ( 1= YES 2= NO )
Pos 10= GIANNINI MODEL ( 2= 650NP 3 = 500TV )
Pos 11= BODY ADDITIONS ( 1= normal 2= chrome doorsteps 3 = chrome side strips 4 = 2+3 combined )
Conversion to other games:
Permission needed from ALL AUTHORS and when granted, original authors must be mentioned.
Version History:
- 1.0: 21. Feb, 2020: First release version.
Nappe1 Signs off,
21st of February, 2020.
--------------------------------------------------
---
Protobuilders Proudly present;
The 1970 Mini 850
version 1.2
Installation:
- Delete "1970 Mini 850" folder from Gamedata\Teams\TC-76\ if it exists.
- Extract to your GTL main folder.
- Select Mini Cooper S or GTC-TC-76 from classes menu to select car.
- Do not use version 1.0 car setups or you'll lose the superior handling of the new physics.
Brought to you by:
Nappe1
Acknowledgements:
- Simbin AB: for the original Mini model
- Sharpo: for the wide arches and wheel sets
- James_1: for the nobumpers bumper style.
Thanks:
- Whoops for TC-65 skins, which unfortunately were left for next version as this car is part of the upcoming online championships.
- Gravin and Ga2jo for support Protobuilders. (Ga2jo we miss you, where are you?)
Differences to original Austin Mini Cooper S:
- Complete Standalone (G)TC-76 class with wide arches bodystyle.
- Complete new, Authentic physics. A mixture of early Mini Seven racers and late FIA group 2 physics of 850cc Mini.
- Engine is low on power, but has quite lot low end torque, as the 848cc BMC A-series was
- Authentic 4-speed short ratio racing gearbox with real world selection of final gears. (lot's of them)
- Uses (G)TC-76 spec tyres, so lots of grip to optimize driving line.
- two authentic Longman 850cc Mini Seven racing skins (#51 and #55)
- One (#6) fictional skin to memory of F1 Venue Championship season 2009 and The REAL Mod.
- Mod cars features extra class tags SIM_TC76 and SIM_ETCC1970 for those who want to build own single player championship.
Mini was found more than just small people carrier quite soon after it was shown public. 850cc powered car found its way soon to Rallies and Track. Quite soon was also found that single cam bearing engine tuning potential was greatly reduced due cam being so sensitive to higher rpms. As soon as Cooper model was launched, 850cc version was slowly but surely being forgotten from racing even though it ran in different class than it's bigger brothers. However in 1961, just before the Cooper model got momentum, John Whitmore won BSCC in 850cc Mini showing that even with its limitations, Car had potential. In 1966 Mini Seven racing class was introduced to cheap way to get in touring car racing. Car was cheap to buy and in certain limits also rather cheap to tune for racing. Entries for international races for 850cc Minis were scarse, but when the new Group 2 regulations arrived, ETCC start lists show few entries for Group 2 Minis in below 850cc class. Horst Garthe (Germany) even won Zandvoort ETCC race 850cc class from the front of whole fleet of Abarth 850TC Corsas which were technologially superior.
In early 70's Mini Seven racers usually used 970S block with extremely short stroke. As S-blocks featured more cam bearings and being stroked down to 850cc, allowed these machines use very high rpms. However this mod features a normal 848cc block developed to the max and so the maximum rpm is rather low. However the suspension has been modifed to ones used in Mini Seven racing.
If you ever wondered what made the Original mini so exciting in eyes of John Cooper or Ralph Broad, Take this baby up to JCRR's splendid St. Roch with very low final gear... After that you figure out the answer.
Conversion to other games:
- Due this mod using so many author additions, permission wise conversion is close to impossible.
Next version includes:
- TC-65 variant, which would compete with possible 850cc version of Imp.
Modding information:
- Original Mini templates can be used, just use same naming for dds files as the cars included in this package.
- Genstring works just like in Original Mini with following changes:
1. ONLY sharpo's widearched bodystyles, bodystyle letters: u,v,w,x,y same order as their non widearch counterparts in original mini, eg. 1=u, 2=v, 3=w and so on and so forth.
NO original Mini bodystyles!
2. sharpo's wider wheel styles: u,v,w,x,y
"u" = silver painted.
"v" = black painted centre with polished rim.
"w" = silver painted centre with highly polished rim.
"x" = red painted centre with alloy rim.
"y" = black painted.
NO original Mini wheelstyles!
3. James_1's No Bumpers bumperstyle is as style "n".
Version History:
- 1.0: 1st April, 2018: First release version.
- 1.2: 8th of April, 2018: Complete fix for the physics; previous version had wrong tyre file and correct one needed a lot of work to all the other physics.
1st of April, 2018
Nappe1 Signs out.
Forum 
Beliebt: 0
wie soll ich mit 1,94 da reinpassen
) 
