Hi all

sorry

I tried quickly in English forums but I have not found the answer, do not even try in German...

I've just installed the devices of subjet (replaced Logitech DFGT)and 6-speed H-pattern shifter doesn't work in GTLegend

neutral ok: no need setup
setup ok for: 1^, 2^, 3^, 4^ (acquire ok)
setup KO for: reverse, 5^, 6^ (not acquire)

Sequential shifter work ok

Last firmware (756) and last driver (64bit v144).

Has anyone had the same problem and solved it?

Could you help me?

Thank you very much

Cheers

Lucas

Hi Lucas,
Xpadder 5.3(?) Freeware solved the same problem for me.

Regards,
dikl

Have you calibrated the shifter?

I had the same problem with a new shifter set from Fanatec an forgot to calibrate it.

Here is the introduktion for calibration is from the webside of fanatec:

1. Connect the 7GS to the shifter port of your wheel
2. Power the wheel on
3. Set the wheel into PC mode (press "Back" Button)
USB cable must be connected to engage the PC mode. For calibration you can connect the USB cable also to the Xbox 360 but the cable will NOT be needed later on for playing.
4. Press "Tuning Button" + "Start Button" simulanously
Display will show G_n
5. Move 7GS (shifter) into neutral position and press "Start Button"
Display will show G_r
6. Move 7GS into reverse gear position (push stick to the very left position and up) and press "Start Button"
Display will show G_1
7. Move 7GS into first gear position and press "Start Button"
Display will show G_2
8. Move 7GS into second gear position and press "Start Button"
Display will show G_3
9. Move 7GS into third gear position and press "Start Button"
Display will show G_4
10. Move 7GS into fourth gear position and press "Start Button"
Display will show G_5
11. Move 7GS into fith gear position and press "Start Button"
Display will show G_6
12. Move 7GS into sixth gear position and press "Start Button"
Display will turn off again -> Calibration done!

Roger

Erel 68 wrote:
Have you calibrated the shifter?

I had the same problem with a new shifter set from Fanatec an forgot to calibrate it.

... cut...
Roger

Hi all

thanks Dikl and Roger

I made calibration for first

In Fanatec control panel all shifter positions, all wheel buttons are right

To night, after came back home, I try with Xpadder...

Cheers

Lucas

Monello1964 wrote:

... cut ...

thanks Dikl and Roger

I made calibration for first

In Fanatec control panel all shifter positions, all wheel buttons are right

...cut...

Lucas

Hi all

I believe understand the question:

May be that GTL accept 16 bits devices, so by Xpadder I checked that 5^, 6^ and reverse are 17th, 18th and 19th bit and the game doesn't read those buttons

Xpadder (background running), turns the three gears that GTL does not read from the steering wheel in three keys of the keyboard, which I have chosen from those free.

All's well that ends well

Cheers

Lucas

P.s.: I'm sorry that I have sold an oriental steering wheel... despite I've bought in Europe