Hello guys

Surely many owners of Fanatec here !!

I have a V2 pedal that makes me miseries
(Irregular clutch stroke, does not return to 0 and occasionally throttle)
I have already contacted fanatec who asks me some tests, but the problem does not come all the time...

who experienced these problems and once the change of cells or motherboard does it fix the problem permanently?

Thank you for your opinions

I have a fanatec set. PosSible hall sensor failure I had that with throttle. Or dust build up between sensor and magnet. I needed to order a new sensor. Be sure to tell it's for the clutch the is cable length difference between the throttle and clutch sensor. They are not realy expensive and fanatec ships it fast....

Hope this helps.

Hi,

I had the same problem and had send the pedals to fanatec after contacting the service. They changed the hall-sensor and it works fine now.

greets

rdjango

Hi Christian,
I made same experiences like you.
Look here: http://www.altbierbude.de/component/ option,com_fireboard/Itemid,99/func,view/id,94204/ catid,3/

Basically the cables are to weak for the construction.
Use new ECBs from Fanatec (ca. 20€) for the clutch and the throttle and check ALL cables for the brake pedale including the potentiometer.
If you are liable to solder, change the thin cables against new thicker cables.

And also fix the cables from the small ECB to the aloi lever of the clutch and the throttle with a cable tie ca. 3 cm under the ECB.

regards,
dikl

dikl schrieb:
Hi Christian,
I made same experiences like you.
Look here: http://www.altbierbude.de/component/ option,com_fireboard/Itemid,99/func,view/id,94204/ catid,3/

Basically the cables are to weak for the construction.
Use new ECBs from Fanatec (ca. 20€) for the clutch and the throttle and check ALL cables for the brake pedale including the potentiometer.
If you are liable to solder, change the thin cables against new thicker cables.

And also fix the cables from the small ECB to the aloi lever of the clutch and the throttle with a cable tie ca. 3 cm under the ECB.

regards,
dikl


Ok,dikl, thanks for the response.
I will order the parts and watch the cables.

Thanks to rdango & delamontagne

A review of CSW 2.5 vs CSL Elite vs G27?!!!

The 200 € more for the CSW 2.5 are worth it ??